Titebond White Glue

Titebond White Glue is an exceptionally strong, economical white glue that sets faster than most other comparable glues. Its versatile formula is ideal for general woodworking applications, as well as many other porous and semi-porous materials.  Titebond White Glue provides a strong initial tack and sets fast to reduce clamp time. It provides a translucent glue line, offers excellent sandability and is unaffected by finishes. Titebond White Glue is easy to use, non-toxic and cleans up with water.

Product Features

• Fast set - Strong bond
• Safe - no solvent vapors
• Water cleanup & non-toxic
• Versatile
• Dries clear and colorless
• Sets faster than most other white glues

Physical Properties

*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Bond Strength ASTM D-905 (On Hard Maple)

Application Guidelines

Application Temperature Above 50°F.

Open Assembly Time 5 minutes (70°F./50%RH)

Total assembly time 10-15 minutes (70°F./50%RH)

Minimum required spread 7 mils (typical)

Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.

Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond White Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING.

Caution Statements

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Ordering Information

Download MSDS (Material Safety Data Sheet)